Low-end routers may take 15-20 seconds to "write mem" !! term leng 0 conf t no service password-encryption logging buffered errors logging console errors logging console ! I also noticed that my default route on my computer points to the router's FE80 address--not the 2001: address (possibly because of the 1F1x issue? Thanks for any information that could help me with this. My "client" addresses use the 1F10 portion, but my "routed" addresses use the 1F11 portion.
prett persuasion dating - Updating cisco 2514 ios
ip nat inside source list 10 interface Dialer1 overloadno ip http serverip classlessip route 0.0.0.0 0.0.0.0 Dialer1!!
access-list 10 permit 192.168.2.0 0.0.0.255access-list 10 permit 192.168.3.0 0.0.0.255dialer-list 1 protocol ip permitno cdp runipv6 route ::/0 Tunnel0! end One thing I noticed just now (and I don't remember it ever changing) is that on my tunnel, it has "1F10" in the address, and in my ethernet, it has "1F11".
Nudists are far-famed to romp, cavort, frolic, hop, skip, leap, caper, rollick, bounce, dance, and gambol—all whereas sporting nothing over the garments that God gave them at birth.
The modern individualist movement started in European nation in 1903.
interface Ethernet1 description Physical ADSL Interface (Facing the ISP) no ip address no ip mroute-cache pppoe enable pppoe-client dial-pool-number 1 no cdp enable!
interface Serial0 no ip address no ip mroute-cache shutdown no cdp enable!
» more John & Christie: «It still gets better every day!
We have never imagined dating online could be this great and lead to a long-lasting relationship.
Aside from the ::2 and :: at the end of the tunnel/ethernet address, that's the only difference in it.